North America Rebar Steel Market – [2028] Growth, Trends & Forecast

The North America rebar steel market is anticipated to grow robustly during the forecast period 2024-2028 due to the rapid growth in the demand for rebar steel from the construction sector and increasing government programs in the region. Additionally, global urbanization reached a 57 percent level in 2022. With more than 45 percent of the population living in cities, North America had the highest rate of urbanization.

Rebar (short for reinforcing bar), frequently referred to as reinforcing steel or reinforcement steel when grouped together, is a steel bar used as a tension device in reinforced concrete and reinforced masonry constructions to aid and strengthen the concrete when it is under tension. While having a low tensile strength, concrete is robust in compression.The structure’s tensile strength is greatly increased by rebar. To improve its bond with the concrete and lessen the chance of slippage, rebar has a continuous series of ribs, lugs, or indentations on its surface. The most used rebar material is carbon steel, which is normally made of hot-rolled round bars with embossed deformation patterns. Download FREE Sample Report @ https://www.techsciresearch.com/sample-report.aspx?cid=15474  A concrete structural part reinforced with steel will experience little differential stress when the temperature changes because steel and concrete have similar coefficients of thermal expansion. Moreover, using data from the IMF, it was estimated that the nominal GDP of the 24 economies that make up the North American region in 2021 was roughly USD 26.8 trillion, or USD 2.7 trillion more than in 2020. The nominal GDP of North America, which ranks as the second-largest continent, is 28% of the global GDP.Expanding Investments in Infrastructure DevelopmentRising investments in infrastructure development and building projects are expected to drive the market. The demand for rebar steel is likely to rise in the region as a result of numerous infrastructure development projects that have been planned in North American nations with the aim of fostering economic growth. For instance, under its investing in Canada plan, the Canadian government has promised to invest more than USD 180.0 billion in infrastructure development in the nation over the next twelve years. Considering the growing spending on the development of residential and non-residential areas, the US is one of the primary markets for rebar steel.US Government Investment Act and Growing infrastructure SpendingThe US government passed the Infrastructure and Investment Jobs Act 2021, which focuses on rebuilding the nation by funding infrastructure projects such as roads, railroads, bridges, ports, communication networks, and water supply systems. Over the course of the projected period, it is anticipated that the US’s initiatives to restore its infrastructure and rising construction spending will increase product demand. According to the government, major highways and roads as well as 45,000 bridges require to be fixed in the US. The Act allows USD 110.0 billion for the reconstruction of roads and bridges. The government further intends to spend USD 25.0 billion on airports and USD 17.0 billion on waterways and port facilities. It is projected that these investments will increase product demand in the US during the forecast period.In addition, spending on both residential and non-residential buildings has greatly increased during the previous years. Corresponding to the US Census Bureau, spending on single-family residential spaces climbed by 19.3% year over year, from USD 400.5 billion in April 2021 to USD 477.6 billion in April 2022. As of April 2022, construction spending on non-residential areas went from USD 456.9 billion to USD 503.2 billion. However, the rising mortgage rates in the US are likely to limit construction spending, which is anticipated to have an impact on product demand during the forecast period. For instance, the agreed-upon rate for a 30-year fixed-rate mortgage climbed from 3.3% in January 2022 to 5.4% in April 2022. Acceptance of Technological Advancements Propelling the Market GrowthA deeper exploration of the sectoral system of production and innovation is likely to be encouraged by the advancement of innovations, the proliferation of new processes and technology, and the greater collaboration between suppliers, producers, and users in the steel industry. With increased innovation and advancement in the rebar steel industry, there will be considerable commercial opportunities for both established and emerging market players. Technological advancements and high-end applications promote rebar steel innovation. Corrosion-resistant, epoxy-coated, and earthquake-resistant applications use modern rebar steel. In addition, technologies such as microalloying, and thermos mechanical treatment are widely used during the production of rebar steel to increase the material’s bendability, weldability, ductility, and corrosion resistance. Hence, the market is expected to register a high CAGR during the forecast period.Development of Wire Rod Usage in Various Application Areas is Driving the MarketTo create wire rods, a form of steel product, steel billets are typically hot rolled into a cross-section that is circular. Before the final products are made, wire rods undergo extensive further processing in secondary and tertiary processing facilities. Additionally, a range of industrial enterprises commonly utilize the finished goods as crucial parts. Thus, it is expected that increased use of wire rods in a variety of application areas will create a commercial opportunity for North America wire rod manufacturers and distributors. As a result of growing user demand for higher-quality wire rods for a range of applications, including the production of steel cords for reinforcing automobile tyres, high strength cables, galvanized wire for suspension bridges and roadways, railway switches, spring wire, reinforcement strands, fasteners, welding rods, and rods for the reinforcement of buildings, the production of wire rods has also undergone technological development in recent years. Therefore, the expanding use of wire rods in numerous application areas is likely to support the growth of the North America rebar steel market during the forecast period.Recent Development

Building construction investment grew to USD 20.0 billion in February 2022 from USD 16.8 billion in February 2021, according to Statistics Canada. Thus, it is anticipated that the infrastructure segment will have the fastest CAGR in terms of revenue during the forecast period.To promote economic growth and advance the construction industry, the Mexican government and the private sector drafted a third infrastructure package in March 2022 for a total cost of USD 3.5 billion. Prior to that, the government unveiled two infrastructure packages in 2020 totaling USD 26.4 billion, which included 68 construction projects for roads, ports, railroads, and airports.To build two manufacturing plants in Tennessee and Kentucky, the US, Ford Motor Company agreed to invest USD 11.4 billion in September 2021. Batteries for Ford and Lincoln’s next electric automobiles will also be produced at the facilities, along with electric F-Series trucks. 2025 is the anticipated start date for these plants’ output.According to the US Census Bureau, Texas single-family home permits acquired in February 2022 increased by 16.5% when compared to permits obtained in February 2021. The state authorities predict that this tendency will persist in the coming years as well. Numerous building initiatives are being started in Canada with the goals of assuring long-term economic growth, transforming to a clean economy, and enhancing social inclusion.The USD 20 trillion US economy depends on an extensive network of infrastructure, including highways, bridges, freight rail, ports, electricity grids, and internet access. However, the mechanisms in place were created many years ago, and economists claim that delays and increasing maintenance costs are slowing down economic performance.To strengthen its manufacturing capacity and assure long-term success, the Mexican government announced a plan to invest about USD 44 million in new and improved infrastructure in 2019. This investment serves as an innovative strategy for energy projects, IT infrastructure, transit projects, and private investment in many other fields. It aims to support Mexico’s economic expansion and raise its level of international competitiveness. Due to its advantageous location, cost-effectiveness, and trained workforce, Mexico is now more attractive than ever for manufacturing.With a GDP of USD 1.3 trillion, Mexico has the second-largest economy in Latin America and ranks 15th globally. Any American engineering or construction supply company should therefore carefully assess its infrastructure plans.

Market SegmentationThe North America rebar steel market is divided into type, end use, process, finishing type, and country. Based on type, the market is divided into deformed and mild. Based on end use, the market is segmented into residential, commercial, industrial, and public. Based on process, the market is divided into basic oxygen steelmaking and electric arc furnace. Based on finishing type, the market is segmented by epoxy-coated rebar, carbon steel rebar, and others. Based on country, the market is divided into the US, Canada, and Mexico.Market playerMajor players operating in the North America rebar steel market are Gerdau S.A, Commercial Metals Company, Steel Dynamics, Inc, Schnitzer Steel Industries, Inc, Acerinox S.A, EVRAZ North America, Inc, Pacific Steel Group, ArcelorMittal, Nucor Corporation, and Ternium S.A.

AttributeDetailsBase Year2022Historic Data2018– 2021Estimated Year2023Forecast Period2024 – 2028Quantitative UnitsRevenue in USD Million, value, and CAGR for 2018 -2022 and 2023 – 2028Report coverageRevenue forecast, Company Share, growth factors, and trendsSegments coveredTypeEnd UseProcessFinishing TypeCountryRegional scopeNorth AmericaCountry scopeUnited States, Canada, MexicoKey companies profiledGerdau S.A, Commercial Metals Company, Steel Dynamics, Inc, Schnitzer Steel Industries, Inc, Acerinox S.A, EVRAZ North America, Inc, Pacific Steel Group, ArcelorMittal, Nucor Corporation, and Ternium S.A.Customization scope10% free report customization with purchase. Addition or alteration to country, regional & segment scope.Pricing and purchase optionsAvail customized purchase options to meet your exact research needs. Explore purchase optionsDelivery FormatPDF and Excel through Email (We can also provide the editable version of the report in PPT/Word format on special request)

Report Scope:In this report, the North America rebar steel market has been segmented into the following categories, in addition to the industry trends which have also been detailed below:

North America Rebar Steel Market, By Type:DeformedMildNorth America Rebar Steel Market, By End Use:ResidentialCommercialIndustrialPublicNorth America Rebar Steel Market, By Process:Basic Oxygen SteelmakingElectric Arc FurnaceNorth America Rebar Steel Market, By Finishing Type:Epoxy-Coated RebarCarbon Steel RebarOthersNorth America Rebar Steel Market, By Country:United StatesCanadaMexico

Competitive LandscapeCompany Profiles: Detailed analysis of the major companies present in the North America rebar steel market. Related ReportsConcrete Surface Retarders Market [2028]: Analysis & ForecastEnergy Efficient Glass Market –Overview, Trends [2028], & AnalysisFoam Tape Market [2028]: Trends & Opportunities Table of Content-North America Rebar Steel Market

Product Overview

1.1.  Market Definition1.2.  Scope of the Market1.3.  Markets Covered1.4.  Years Considered for Study1.5.  Key Market Segmentations

2. Research Methodology

2.1.  Baseline Methodology2.2.  Key Industry Partners2.3.  Major Association and Secondary Sources2.4.  Forecasting Methodology2.5.  Data Triangulation & Validation2.6.  Assumptions and Limitations

3. Executive SummaryVoice of CustomersNorth America Rebar Steel Market Outlook

5.1.  Market Size & Forecast5.1.1.    By Value5.2.  Market Share & Forecast5.2.1.    By Type (Deformed, Mild)5.2.2.    By End Use (Residential, Commercial, Industrial, Public)5.2.3.    By Process (Basic Oxygen Steelmaking, Electric Arc Furnace)5.2.4.    By Finishing Type (Carbon Steel Rebar, Epoxy-Coated Rebar, Others)5.2.5.    By Country (United States, Canada, Mexico)5.3.  By Company (2022)5.4.  Market Map

6. United States Rebar Steel Market Outlook

6.1.  United States Economic Profile6.2.  Market Size & Forecast6.2.1.    By Value6.3.  Market Share & Forecast6.3.1.    By Type6.3.2.    By End Use6.3.3.    By Process6.3.4.    By Finishing Type

7. Canada Rebar Steel Market Outlook

7.1.  Canada Economic Profile7.2.  Market Size & Forecast7.2.1.    By Value7.3.  Market Share & Forecast7.3.1.    By Type7.3.2.    By End Use7.3.3.    By Process7.3.4.    By Finishing Type

8. Mexico Rebar Steel Market Outlook

8.1.  Mexico Economic Profile8.2.  Market Size & Forecast8.2.1.    By Value8.3.  Market Share & Forecast8.3.1.    By Type8.3.2.    By End Use8.3.3.    By Process8.3.4.    By Finishing Type